Package Contents

• Bar and frame assembly × 2
• Feet × 4
• Wood screws × 8
• Screwdriver bit × 1

Note: If you purchased a single unit to be used as a fitness barre, your package will contain half the number of parts.

Setup

1. Insert screws into feet
   From the underside, insert the wood screws into the feet.
2. Align feet with frame
   Position each foot so that the marked holes align with the corresponding markings on the frame. Feet orientation matters.
3. Secure the feet
   Drive the screws into the frame until they are fully fastened and the feet are firmly attached.

Safe Use Guidelines

• Always use common sense and be aware of your personal limits while training.
• Consult your doctor if you have any medical conditions, and stop exercising if you feel unwell.
• Learn and practice proper exercise technique before using the equipment.
• Ensure the equipment is properly installed, safe to use, and undamaged before each use.
• Do not modify or attempt to repair the equipment yourself.
• Do not allow others to use the equipment unless they are capable and responsible.
• If others use the equipment, inform them of all potential risks and ensure proper supervision.
• This equipment is designed for use by one person at a time with a maximum user weight of 120 kg (265 lbs).
• Never allow children under 36 months to use this equipment.
• Children must be under the constant supervision of a competent adult when near or using this equipment.

Warning! Fitness training is a potentially dangerous activity that can result in injury or death. You assume full responsibility for any damage, injury, or death resulting from improper installation or use of this equipment.