Package Contents
- Bar and frame assembly × 2
- Feet × 4
- Wood screws × 8
- Screwdriver bit × 1
Note: If you purchased a single unit to be used as a fitness barre, your package will contain half the number of parts.
Setup
- Insert screws into feet
From the underside, insert the wood screws into the feet. - Align feet with frame
Position each foot so that the marked holes align with the corresponding markings on the frame. Feet orientation matters. - Secure the feet
Drive the screws into the frame until they are fully fastened and the feet are firmly attached.
Safe Use Guidelines
- Always use common sense and be aware of your personal limits while training.
- Consult your doctor if you have any medical conditions, and stop exercising if you feel unwell.
- Learn and practice proper exercise technique before using the equipment.
- Ensure the equipment is properly installed, safe to use, and undamaged before each use.
- Do not modify or attempt to repair the equipment yourself.
- Do not allow others to use the equipment unless they are capable and responsible.
- If others use the equipment, inform them of all potential risks and ensure proper supervision.
- This equipment is designed for use by one person at a time with a maximum user weight of 120 kg (265 lbs).
- Never allow children under 36 months to use this equipment.
- Children must be under the constant supervision of a competent adult when near or using this equipment.
Warning! Fitness training is a potentially dangerous activity that can result in injury or death. You assume full responsibility for any damage, injury, or death resulting from improper installation or use of this equipment.